SCPrompt - SC on Steroids (2K, XP, Vista, 7, 2008) 8/4/11

Single Click discussions / bugs

Re: SCPrompt 2009 (Vista Capable - server 1.0.6.4) 21/7/09

Postby JDaus » 2009-08-09 10:18

marcgistel wrote:the scprompt is trying to start a second instance of uvnc.exe the whole time and is killing it immediatly after the creation.
This is only happening on vistax32.
He is doing that for about 1minute then he is stopping that(waiting 1minute) and it goes again
sorry Marc, I missed this post for some reason ...

is it your machine that this was happening on ? or a customers ?

if yours, can we arrange a time that I can take a look ???
ask a silly question and remain a fool for 5 minutes...
don't ask, and remain a fool for life - JDaus 2003

without imperfections, neither you nor i would exist - Steven Hawkins
__
JD
VNC2Me - OpenSource Free Remote Screen\Desktop Sharing Solutions
SecureTech
JDaus
Friend of UVNC
Friend of UVNC
 
Posts: 516
Joined: 2007-03-17 11:00
Location: Sydney, Australia

Re: SCPrompt 2009 (Vista Capable - server 1.0.6.4) 21/7/09

Postby JDaus » 2009-08-10 12:11

ImageDOWNLOAD ...

I found some time on the weekend, and have updated the source code to use yet another GUI (cannot take the credit for this one) ... "Button" GUI has large buttons to press before pressing submit ...

Issues with this release ...
    Manual button does't disable Photo Background ... working on this
    Photo Background and image need to be higher to line up with Logo ...

Added features ...
    Added better multi-language support by adding the ability to set most options from the scprompt.ini file into the relevant laguage section of v2m_lang.ini (looks in v2m_lang.ini first, if not exist, looks in scprompt.ini, if not exist, write and use default) most settings should be working, but please test all, and let me know what doesn't work ... predefined connection settings is one that is (at the moment anyway) not setup to use this method (if i remember right)


there are more things that i have added since last release ... but i can't remember right now ... sleeeeeeeppppppyyyyy, and battery going flat on laptop ...
ask a silly question and remain a fool for 5 minutes...
don't ask, and remain a fool for life - JDaus 2003

without imperfections, neither you nor i would exist - Steven Hawkins
__
JD
VNC2Me - OpenSource Free Remote Screen\Desktop Sharing Solutions
SecureTech
JDaus
Friend of UVNC
Friend of UVNC
 
Posts: 516
Joined: 2007-03-17 11:00
Location: Sydney, Australia

Re: SCPrompt 2009 (Vista Capable - server 1.0.6.4) 21/7/09

Postby marcgistel » 2009-08-10 16:06

Hey JD,

no sorry cant rebuild it yet, the laptop is no more on my side. It was an customer laptop. I try to rebuild this with an VM or something at home.

best regards,
marc
marcgistel
40
40
 
Posts: 72
Joined: 2008-03-26 09:07
Location: Ulm, Germany

Re: SCPrompt 2009 (Vista Capable - server 1.0.6.4) 21/7/09

Postby JDaus » 2009-08-12 08:15

marcgistel wrote:the laptop is no more on my side. It was an customer laptop.
OK, let me know if you can reproduce the error, and i will take a look to see what is happening ...

without being able to reliably reproduce an error it makes it near impossible to troubleshoot and fix the error ... i would be just guessing
ask a silly question and remain a fool for 5 minutes...
don't ask, and remain a fool for life - JDaus 2003

without imperfections, neither you nor i would exist - Steven Hawkins
__
JD
VNC2Me - OpenSource Free Remote Screen\Desktop Sharing Solutions
SecureTech
JDaus
Friend of UVNC
Friend of UVNC
 
Posts: 516
Joined: 2007-03-17 11:00
Location: Sydney, Australia

Re: SCPrompt 2009 (Vista Capable - server 1.0.6.4) 21/7/09

Postby marcgistel » 2009-08-12 09:45

You are right! I will contact you if it is possible for me to reproduce the error.

best regards,
marc
marcgistel
40
40
 
Posts: 72
Joined: 2008-03-26 09:07
Location: Ulm, Germany

Re: SCPrompt 2009 (Vista Capable - server 1.0.6.4) 21/7/09

Postby JDaus » 2009-08-16 13:02

Testing release 0.9.8.29

Download

My thanks and gratitude go to pheonix for his work behind the scenes to get several features added, creating and updating the settings manager, new LOGO and just keeping me motivated ... :P

an honorable mention to marcgistel for helping out answering questions on the forum... thanks

Image

Many little bugs have been sorted, with some additions as well.

    New SC compatible (INI option to use server if that is still required). This saves 270KB in final app. (JD)
    INI Sections added to simplify manual editing. (JD)
    Settings Manager Updated to use all latest settings and Features (Pheonix)
    Bugs in Button GUI sorted (pheonix & JD)
    UpdateURL is now an INI option, allowing companies (or individuals) to notify users when updates are available for their custom app (JD)
    NoImage.jpg photo image works if logoX.jpg file doesn't exist (pheonix)
    ALL GUI's Updated with top text (see below images) (pheonix)


to use UPX to pack the scprompt EXE (thats built by the builder) you will need to edit the "Build_7z_exe.ini" and change the setting "UseUPX" to 1. This is turned off as standard as it doesn't compress EXE much further, and can cause issues with some firewalls and Virus scanners.

The Combo GUI (and automatic connection GUI) supports unlimited predefined connections, but Radio GUI can only have ten (10) and Button GUI can only have eleven (11). this should be enough for 99% of cases i think ... anyone requiring more can spend the time to work out how to modify the source to their own needs ...

Testers please check it out and give feedback

We need people to check that the GUI(s) that they use (or any others) are working fine, and that the app connects using all predefined and manual configurations, as work has happened on much of the code by several people, meaning we may have introduced bugs without knowing it. I (JD) have tested it as best i could before this release, but bugs may exist still.

Multiple Languages in one App

For those users that have a need for multiple supported languages from the one app. this should be addressed now, most settings related to GUI or appname can be set in the v2m_lang.ini in the specific language you require. if these settings are not found in there, the default scprompt.ini is used. If more information is required about this, let me (JD) know, and i will write more info.

If you only support one language, then ignore the above feature.




New GUI images are below:

Image

Image

Image

Image

Image

Image

Image

Image
ask a silly question and remain a fool for 5 minutes...
don't ask, and remain a fool for life - JDaus 2003

without imperfections, neither you nor i would exist - Steven Hawkins
__
JD
VNC2Me - OpenSource Free Remote Screen\Desktop Sharing Solutions
SecureTech
JDaus
Friend of UVNC
Friend of UVNC
 
Posts: 516
Joined: 2007-03-17 11:00
Location: Sydney, Australia

Re: SCPrompt 2009 (Vista Capable - server 1.0.6.4) 21/7/09

Postby NomadCF » 2009-08-18 18:53

any Chance of getting the DSM plugin working with SCPrompt ?
NomadCF
 
Posts: 2
Joined: 2009-02-06 12:50

Re: SCPrompt 2009 (Vista Capable - server 1.0.6.4) 21/7/09

Postby Frontier » 2009-08-19 13:15

About the settings manager in SCPrompt 0.9.8.29 Alpha:

if one uses the connection manager and clears the phone number, it still exists in the .ini file...
Last edited by Frontier on 2009-08-19 13:26, edited 1 time in total.
Frontier
8
8
 
Posts: 14
Joined: 2004-10-26 09:10
Location: Denmark

Re: SCPrompt 2009 (Vista Capable - server 1.0.6.4) 21/7/09

Postby Frontier » 2009-08-19 13:31

Same version: if one leaves TEXT1, TEXT2 etc. blank in scprompt.ini, an English text is inserted...
Frontier
8
8
 
Posts: 14
Joined: 2004-10-26 09:10
Location: Denmark

Re: SCPrompt 2009 (Vista Capable - server 1.0.6.4) 21/7/09

Postby JDaus » 2009-08-20 01:09

NomadCF wrote:any Chance of getting the DSM plugin working with SCPrompt ?
You can setup the Server version to use the DSM plugin ... it is setup in the ultravnc.ini exactly as it would be to use it in a "normal" server installation ... scprompt just starts the server with a reverse connection ...

as for specifics on how to do this ... i cannot tell you ... i use SSH for encryption, not DSM ... but searching the forums or docs should give you an answer ...

Frontier wrote:settings manager in SCPrompt 0.9.8.29 Alpha:

if one uses the connection manager and clears the phone number, it still exists in the .ini file...
Thanks ... i will look at this, and repair the code ... thats why its an alpha release ... :D


Frontier wrote:Same version: if one leaves TEXT1, TEXT2 etc. blank in scprompt.ini, an English text is inserted...
Is this in the settings manager (actually writing to the INI) or in the scprompt application that this appears ??? if its the later, try manually editing the INI, and ad a space in quotes ... like this
Code: Select all
settingname=" "
This way the scprompt app sees that it isn't "" (blank) and doesn't write the defaults into the file ...

if its in the settings manager, i will look at the code, and make the changes ... thanks for the feedback ...
ask a silly question and remain a fool for 5 minutes...
don't ask, and remain a fool for life - JDaus 2003

without imperfections, neither you nor i would exist - Steven Hawkins
__
JD
VNC2Me - OpenSource Free Remote Screen\Desktop Sharing Solutions
SecureTech
JDaus
Friend of UVNC
Friend of UVNC
 
Posts: 516
Joined: 2007-03-17 11:00
Location: Sydney, Australia

Re: SCPrompt 2009 (Vista Capable - server 1.0.6.4) 21/7/09

Postby phoenix » 2009-08-28 11:50

Hey JDaus,

I get error message during creation scprompt.
Added files is succesfull < everthing is ok but then I get message:
Error creating 'temp\scpompt_0.9.8.29.exe' from \temp\scprompt_0.9.8.29.exe'
phoenix
8
8
 
Posts: 9
Joined: 2006-05-20 18:49

Re: SCPrompt 2009 (Vista Capable - server 1.0.6.4) 21/7/09

Postby marcgistel » 2009-08-31 13:54

hey guys iam back from my hollydays and will look some oftener in this forum from nowon.

You two did very nice work on the scprompt project! Want to congratulate you!

Phoenix: I dont get any error while compiling. maybe you dont have writepermissions in that folder?


best regards,
marc
marcgistel
40
40
 
Posts: 72
Joined: 2008-03-26 09:07
Location: Ulm, Germany

Re: SCPrompt 2009 (Vista Capable - server 1.0.6.4) 21/7/09

Postby marcgistel » 2009-08-31 14:16

JDaus wrote:
NomadCF wrote:any Chance of getting the DSM plugin working with SCPrompt ?
You can setup the Server version to use the DSM plugin ... it is setup in the ultravnc.ini exactly as it would be to use it in a "normal" server installation ... scprompt just starts the server with a reverse connection ...

as for specifics on how to do this ... i cannot tell you ... i use SSH for encryption, not DSM ... but searching the forums or docs should give you an answer ...


You have to change the ultravnc.ini like the following screenshot shows:
Image

You have to be sure that the DSM-file is placed in the same folder as the uvnc.exe. I think then it is possible to build an scprompt with dsm-plugin included(did not tested it.). Hope I could help a litle bit.

best regards,
marc
marcgistel
40
40
 
Posts: 72
Joined: 2008-03-26 09:07
Location: Ulm, Germany

Re: SCPrompt 2009 (Vista Capable - server 1.0.6.4) 21/7/09

Postby tbote » 2009-09-02 10:40

If anybody wants the Spanish (Spain) translation just paste this into V2m_lang file:

[Lang_Spanish]
GUI_MNU_FILE = "Fichero"
GUI_MNU_EXIT = "Salir"
GUI_MNU_HELP = "Ayuda"
GUI_MNU_ABOUT = "Acerca de"
GUI_MNU_SWAP = "Ver ventana principal"
MAIN_TAB_SC = "Compartir mi escritorio"
MAIN_TAB_VIEW = "Ver escritorios"
MAIN_TAB_SVR = "Iniciar colaboración"
MAIN_TAB_UVNC = "Uvnc SC"
MAIN_DBGBOX = "Depurar"
MAIN_DBGBOX_TIP = "Pulsar para ver ventana de depuración"
MAIN_STATUS_TIP = "Indica estado del programa"
MAIN_BTN_EXIT = "Salir"
MAIN_BTN_EXIT_TIP = "Salir de la aplicación"
MAIN_SC_SSN = "Código de Sesión"
MAIN_SC_SSN_TIP = "Introduzca Código de Sesión para comenzar a compartir su escritorio"
MAIN_SC_BTN_START = "Compartir escritorio"
MAIN_SC_BTN_STOP = "Dejar de compartir"
MAIN_SVR_SSN = "Código de Sesión"
MAIN_SVR_SSN_TIP = "Introduzca Código de Sesión para comenzar a compartir su escritorio"
MAIN_SVR_RND = "Código de sesión"
MAIN_SVR_RND_TIP = "Pulse para crear un Código de Sesión aleatorio"
MAIN_SVR_BTN_START = "Iniciar Colaboración"
MAIN_SVR_BTN_STOP = "Finalizar Colaboración"
MAIN_VWR_SSN = "Código de Sesión"
MAIN_VWR_SSN_TIP = "Introduzca el Código de Sesión a visualizar"
MAIN_VWR_RND = "Aleatorio"
MAIN_VWR_RND_TIP = "Pulse para crear un Código de Sesión aleatorio"
MAIN_VWR_BTN_START = "Ver Escritorio(s)"
MAIN_VWR_BTN_STOP = "Detener visualización"
MAIN_VWR_RADIO_SC = "Ver SC"
MAIN_VWR_RADIO_SVR = "Ver SVR"
MAIN_UVNC_ADD = "Dirección de Soporte"
MAIN_UVNC_ADD_TIP = "Dirección para conexión directa al visor VNC"
MAIN_UVNC_PORT = "Puerto"
MAIN_UVNC_PORT_TIP = "Puerto para la conexión directa al visor VNC/repetidor"
MAIN_UVNC_BTN_START = "Compartir Escritorio"
MAIN_UVNC_BTN_STOP = "Dejar de compartir"
# added
MAIN_UVNC_ID_TIP = "ID para conectar a repetidor UVNC"

MINI_BTN_EXIT = " C e r r a r S e s i ó n R e m o t a "
MINI_BTN_EXIT_TIP = "Salir de la aplicación"
MINI_STATUS_TIP = "Estado y Eventos"
MINI_SESSION_TIP = "VNC2Me Código de Sesión"

DEBUG_BTN_START = "Solo SSH"
DEBUG_BTN_STOP = "Detener SSH"
DEBUG_BTN_COPY = "Depurar > Portapapeles"

TRAY_MNU_EXIT = "Salir"
TRAY_MNU_ABOUT = "Acerca de"
TRAY_MNU_SHOW = "Ver"
TRAY_MNU_SHOW_MAIN = "Principal"
TRAY_MNU_SHOW_MINI = "Mini"
TRAY_MNU_SHOW_TIMER = "Contador"
TRAY_MNU_SHOW_DEBUG = "Depurar"
TRAY_MNU_SHOW_NONE = "Nada"

TRAYTIP_APP_START_TITLE = "VNC2Me Prompt 2009"
TRAYTIP_APP_START_LINE1 = "VNC2Me GUI Iniciado"
TRAYTIP_APP_START_LINE2 = "No se han encontrado argumentos en la línea de comandos"
TRAYTIP_SSH_START_TITLE = "VNC2Me"
TRAYTIP_SSH_START_LINE1 = "Iniciando túnel SSH"
TRAYTIP_SSH_START_LINE2 = "Enviando detalles de seguridad al servidor"
TRAYTIP_SSH_CONNECTED_TITLE = "VNC2Me"
TRAYTIP_SSH_CONNECTED_LINE1 = "Conexión segura establecida"
TRAYTIP_SSH_CONNECTED_LINE2 = "Iniciando VNC a través de un túnel SSH"
TRAYTIP_APP_GUISWITCH_TITLE = "VNC2Me - Más opciones ..."
TRAYTIP_APP_GUISWITCH_LINE1 = "Para ver más opciones de VNC2Me"
TRAYTIP_APP_GUISWITCH_LINE2 = "pulse el botón derecho sobre éste icono"
TRAYTIP_APP_EXITING_TITLE = "VNC2Me Prompt 2009"
TRAYTIP_APP_EXITING_LINE1 = "Cerrando los procesos"
TRAYTIP_APP_EXITING_LINE2 = "Eliminando los cambios temporales"
TRAYTIP_DEBUG_COPIED_TITLE = "VNC2Me"
TRAYTIP_DEBUG_COPIED_LINE1 = "Salida de depuración copiada"
TRAYTIP_DEBUG_COPIED_LINE2 = "Abra el Bloc de Notas y pulse CTRL+V"
TRAYTIP_VWR_STARTSC_TITLE = "VNC2Me"
TRAYTIP_VWR_STARTSC_LINE1 = "Visor iniciado"
TRAYTIP_VWR_STARTSC_LINE2 = "Esperando conexiones"
TRAYTIP_VWR_STARTSVR_TITLE = "VNC2Me"
TRAYTIP_VWR_STARTSVR_LINE1 = "Visor iniciado"
TRAYTIP_VWR_STARTSVR_LINE2 = "Conectando al servidor"
#added
TRAYTIP_SC_START_TITLE = "VNC2Me Prompt 2009"
TRAYTIP_SC_START_LINE1 = "Conexión VNC iniciada"
TRAYTIP_SC_START_LINE2 = "Intentando conectarse al visor"

MSG_HOST_TITLE = "The host is not cached"
MSG_HOST_TEXT = "This Host is not known, do you want to add it to known hosts ?"
MSG_SSN_TITLE = "Error"
MSG_SSN_TEXT = "Por favor, instroduzca el Código de Sesión y pruebe de nuevo"
MSG_VWR_TITLE = "Visor"
MSG_VWR_TEXT = "No se a elegido tipo de conexión, use SC ?"
MSG_TIMER_TITLE = "Contador de conexión"
MSG_TIMER_TEXT = "Sesión conectada por: "
MSG_PORTC_TITLE = "Error - Sesión rechazada"
MSG_PORTC_TEXT = "Sesión de túnel por SSH rechazada, reintentar?"
MSG_SSHSVR_TITLE = "Servidor SSH"
MSG_SSHSVR_TEXT = "Conectar a qué servidor SSH ?"
MSG_SSHUSER_TITLE = "Nombre de usuario"
MSG_SSHUSER_TEXT = "Introduzca el nombre de usuario SSH"
MSG_SSHPASS_TITLE = "Contraseña"
MSG_SSHPASS_TEXT = "Introduzca la contraseña SSH"
MAIN_UVNC_DROPDEFAULT=MANUAL
tbote
8
8
 
Posts: 27
Joined: 2009-01-27 18:00

Re: SCPrompt 2009 (Vista Capable - server 1.0.6.4) 21/7/09

Postby JDaus » 2009-09-04 10:19

tbote wrote:If anybody wants the Spanish (Spain) translation ...
Awesome ... thanks, will add it into the next release (which shouldn't be far off now ...)
ask a silly question and remain a fool for 5 minutes...
don't ask, and remain a fool for life - JDaus 2003

without imperfections, neither you nor i would exist - Steven Hawkins
__
JD
VNC2Me - OpenSource Free Remote Screen\Desktop Sharing Solutions
SecureTech
JDaus
Friend of UVNC
Friend of UVNC
 
Posts: 516
Joined: 2007-03-17 11:00
Location: Sydney, Australia

Re: SCPrompt 2009 (Vista Capable - server 1.0.6.4) 21/7/09

Postby B » 2009-09-09 14:59

JDaus, THANK YOU so much for your effort on this project. Some questions and observations...

It took me an inordinate amount of time to get things running; for some reason I've always had poor experiences with UltraVNC SC in the past.

No matter what I tried I kept getting password prompts; there's an encrypted pwd field in your distributed UltraVNC.INI file but I didn't know what it was; more so, I couldn't seem to disable the authentication prompts no matter what I did in the INI file. Things got better once I isolated the bare bones VNCViewer executable outside the bounds of my installed UltraVNC directory. (I'm guessing the registry was being queried despite the UltraVNC.ini setting.)

I finally got the MSRC4Plugin to work once I realized I couldn't use the UVNC.EXE in your distribution. Rather, I had to copy WINVNC.EXE from a full installation of UltraVNC into your SCPrompt subdirectory, renaming it to UVNC.EXE. I also had to use the renamed "No Reg" version of MSRC4Plugin.

Anyway, I know your time is limited. I just have some other questions, notes, and observations for your information (and hopefully to improve the project):

1. It seems the official UltraVNC SCHook.dll is closed source. You provide a different SCHook copyrighted "MaxiVista". Is that open source?

2. The program appears to work properly with just VNCHooks present. According to another thread, UltraVNC looks for the presence of both VNCHooks and SCHook and then uses only SCHook if found. Is this accurate? Am I safe in just eliminating SCHook? (And is there any loss / downside in doing so?)

3. Is there some way to disable the blinking of the SCPrompt/AutoIT system tray icon? (I know you can disable the separate VNC icon.) I'm thinking of using this as an "always-on" poller, very similar to an installation of LogMeIn or GoToMyPC. The continued blinking can be distracting.

4. On a related note, is that repolling interval (as SCprompt looks to reconnect to a viewer/relay) adjustable somewhere?

5. The START.BAT in your current distribution uses the "/custom" path that you have since replaced with "/scprompt".

6. There may be some logic problem in the EXE builder -- I noticed that I kept running an older iteration of my build during the last step -- my newer builds were ending up in Temp but NOT replacing the older EXE version in the root directory of SCPrompt. So I just began deleting older versions in TEMP and in the root directory prior to each build. (In fact, at some point I started using the build_with_7zip method instead.)

7. I'm not clear on whether Rudi's "New SC" you linked to in your earlier announcement is closed or open source; do you happen to know?

8. Did you rule out embedding the video driver?

9. Regarding your SCPrompt download page, could you please provide source corresponding to the latest distribution? (Currently I see AutoIT source for an older revision and no source for the UltraVNC components.)

Wish List Item for Future Consideration: Integration with the open source "Gitso" project for multiplatform support (UltraVNC's traditional Achilles' heel from what I can see). They have an interesting approach,
similar to your own VNC2Me project but without encryption. (And by the way, are you still actively developing VNC2Me? How would you compare it / position it against SCPrompt?)

Thanks again for your hard work on this, and I hope you take my comments and questions in the helpful and constructive light that I intend. If you can respond to some or all of my points that would great, but if not I understand. I'm looking forward to your response and to the next version!

-- B
B
Super-Mod
Super-Mod
 
Posts: 2347
Joined: 2009-09-09 14:05

Re: SCPrompt 2009 (Vista Capable - server 1.0.6.4) 21/7/09

Postby JDaus » 2009-09-15 07:37

B wrote:JDaus, THANK YOU so much for your effort on this project. Some questions and observations...

Thanks again for your hard work on this, and I hope you take my comments and questions in the helpful and constructive light that I intend. If you can respond to some or all of my points that would great, but if not I understand. I'm looking forward to your response and to the next version!

-- B

WOW ... what a post ... I will need to read through this when I next get a chance to be infront of a pc ... then I can fix/ add many of the things you have highlighted ... sorry about the wait, I often don't get emailed when replies are posted.

will try to get a chance to reply better in a few hours (when not using a mobile phone) ...
ask a silly question and remain a fool for 5 minutes...
don't ask, and remain a fool for life - JDaus 2003

without imperfections, neither you nor i would exist - Steven Hawkins
__
JD
VNC2Me - OpenSource Free Remote Screen\Desktop Sharing Solutions
SecureTech
JDaus
Friend of UVNC
Friend of UVNC
 
Posts: 516
Joined: 2007-03-17 11:00
Location: Sydney, Australia

Re: SCPrompt 2009 (Vista Capable - server 1.0.6.4) 21/7/09

Postby Wasca » 2009-09-21 06:40

Hey Guys

Just got this great version of Single Click working with Vista (UAC and Aero issues are now gone). The problem I'm seeing is that when the connection is closed by the remote viewer, the other end tries to re-establish the connection automatically, so I refuse the connection and it tries again and again.

How do I stop the automatic reconnect once I close the session?

I've had a look in the ini files but I could not see any setting for stopping auto reconnect.

Would appreciate any assistance

Thanks
Last edited by Wasca on 2009-09-21 06:45, edited 1 time in total.
Wasca
 
Posts: 2
Joined: 2009-09-21 06:33

Re: SCPrompt 2009 (Vista Capable - server 1.0.6.4) 21/7/09

Postby marcgistel » 2009-09-21 09:39

Hi Wasca

as I saw in the source code is that the "autoreconnect"-parameter for the uvnc.exe is hardcoded and can not be changed over the scprompt.ini.
This was on the last version. if it is happening in the actual version iam not sure. I will have a look into the source-code and give you an answer. here.

forgotten to say:
A workarround(if you dont know) you have to open the scprompt in the remotesession and click on Exit. The scprompt will exit uvnc and itselfe and no connection will be established again. Then you can close your viewer.

best regards,
marc
Last edited by marcgistel on 2009-09-21 11:58, edited 1 time in total.
marcgistel
40
40
 
Posts: 72
Joined: 2008-03-26 09:07
Location: Ulm, Germany

Re: SCPrompt 2009 (Vista Capable - server 1.0.6.4) 21/7/09

Postby Wasca » 2009-09-22 00:01

Hi Marcgistel

Thanks for the info, I did figure out how to close it down with out having it reconnect. What do we need to do to have the auto reconnect removed from uvnc.exe? One thing to note is that I copied my winvnc.exe from my 1.065 version of UltraVNC and renamed it to uvnc.exe as per "B's" post acouple of post above mine.

I finally got the MSRC4Plugin to work once I realized I couldn't use the UVNC.EXE in your distribution. Rather, I had to copy WINVNC.EXE from a full installation of UltraVNC into your SCPrompt subdirectory, renaming it to UVNC.EXE. I also had to use the renamed "No Reg" version of MSRC4Plugin.


I wonder if this is causing the problem?
Wasca
 
Posts: 2
Joined: 2009-09-21 06:33

Russian translation (UTF-8 encoding)

Postby s-s-s » 2009-09-22 07:00

Hello everybody!
It's post with Russian translation (UTF-8 encoding)
Russian translation for v2m_lang.ini
Thank you.
s-s-s
 
Posts: 4
Joined: 2009-09-21 16:19
Location: Russia, Moscow

Re: SCPrompt 2009 (Vista Capable - server 1.0.6.4) 21/7/09

Postby marcgistel » 2009-09-22 11:30

Hey Wasca

no this is not the reason.
The reason for the reconnect is hardcoded in the scprompt.exe. scprompt.exe is starting uvnc.exe with parameters and there is a parameter "-autoreconnect". JD read this posts from you, too and I think he is working at the moment at a new version as he said to me. He is working on version 0.9.9.x.x I hope he can implement this option that you can put the parameter in the ini or not. if he is not implementing this feature I will recompile it, implement your feature and give you an extra version for you.
If you can wait some days that JD released his version 0.9.9.x.x. If not I will make you one for you of the version 0.9.6.x.x.

Hey s-s-s

great work! thanks.


best regards,
marc
marcgistel
40
40
 
Posts: 72
Joined: 2008-03-26 09:07
Location: Ulm, Germany

Re: SCPrompt 2009 (Vista Capable - server 1.0.6.4) 21/7/09

Postby mrahk » 2009-09-22 16:56

Concerning Testing release 0.9.8.29:

This is a very good project and a big improvement over the previous version, but as far as I can see it suffers from some bugs at this moment, so I think it might be useful to report them to you.

1) If you clear out the connection fields in the settings manager, the ini-file retains the previous defined values. Deleting them in the ini-file itself works.

2) When using the testdrive in the building sequence, not the customized version is used but instead the standard scprompt in the build folder is used.

3) Somehow I can't create a connection with this program. Even if I try to setup a connection from a computer to itself (using the internal IPaddress; not the loopback connection) it doesn't work. The firewall on the computer doesn't detect an incoming connection. It might be that my modem router interferes, but I don't know for sure.

Furthermore thanks for this great software and keep up the good work!
Last edited by mrahk on 2009-09-22 16:58, edited 1 time in total.
mrahk
 
Posts: 3
Joined: 2008-09-25 14:46

Changing color of the user names

Postby Blue_Bird » 2009-09-23 23:57

First I want to thanks JDaus for the great program and all the hard work. Also everyone who have helped with this project. I have set everything up and it's working great. I have changed all the background colors and the text in lines 1-4. I know this is a stupid question but can someone please help me. I want to change the user names from black to white (I am using Radio). I know it is staring at me and I just can't find it. I tried the settings manager and it added lines with Text1BGColor=0xcccccc
Text2BGColor=0xcccccc but no changes to the color.

UsePredefined=1
#SCNumberConnections=2
SCName_0= THIS ONE
SCIP_0=127.0.0.1
SCPort_0=5500
SCID_0=
SCName_1= AND THIS ONE
SCIP_1=127.0.0.1
SCPort_1=5500
SCID_1=


I want to leave MANUAL as black. THANKS
Last edited by Blue_Bird on 2009-09-24 00:03, edited 1 time in total.
Blue_Bird
 
Posts: 1
Joined: 2007-10-01 21:17

Re: SCPrompt 2009 (Vista Capable - server 1.0.6.4) 21/7/09

Postby JDaus » 2009-09-24 00:02

mrahk wrote:Concerning Testing release 0.9.8.29:
Thanks ... Its always helpful to know what version people are talking about ...
mrahk wrote:I think it might be useful to report them (bugs) to you...

Always good to know where others are having troubles ... thanks
mrahk wrote:1) If you clear out the connection fields in the settings manager, the ini-file retains the previous defined values. Deleting them in the ini-file itself works.

Thanks, I noticed this some time back, but have forgotten to release an updated version of settings manager ...
mrahk wrote:2) When using the testdrive in the building sequence, not the customized version is used but instead the standard scprompt in the build folder is used.

I really don't know how this is pssible, as the 'test drive' (i like that name for it btw) just calls the app 'scprompt.exe' from the directory 'scprompt' (or whatever is set in build_7z.ini)
mrahk wrote:3) Somehow I can't create a connection with this program. Even if I try to setup a connection from a computer to itself (using the internal IPaddress; not the loopback connection) it doesn't work. The firewall on the computer doesn't detect an incoming connection. It might be that my modem router interferes, but I don't know for sure.

Open the tabbed viewer "vncviewer_tab.exe" (installed with latest uvnc downloads), select file/Start Listener (or something similar) and then open scprompt, select loopback & click connect ... you should have viewer asking if you want to accept connection ... click yes ...
mrahk wrote:Furthermore thanks for this great software and keep up the good work!
Your Welcome, thanks for appreciating the small part I play in getting this working ... I just modified someone elses work, and have had others add onto my work also ... so its a community project ... I just steer it and host it :)
Last edited by JDaus on 2009-09-24 01:51, edited 1 time in total.
ask a silly question and remain a fool for 5 minutes...
don't ask, and remain a fool for life - JDaus 2003

without imperfections, neither you nor i would exist - Steven Hawkins
__
JD
VNC2Me - OpenSource Free Remote Screen\Desktop Sharing Solutions
SecureTech
JDaus
Friend of UVNC
Friend of UVNC
 
Posts: 516
Joined: 2007-03-17 11:00
Location: Sydney, Australia

Re: SCPrompt 2009 (Vista Capable - server 1.0.6.4) 21/7/09

Postby Gatorace » 2009-09-24 00:18

JDaus, thank you for a great program. I have an issue that I'd thought that I'd mention.
I have RYO 0.9.6.16, and I have created my app with the COMBO GUI.
However, using the COMBO GUI I cannot get the Manual to connect to any remote computer----> However if I go into the scprompt.ini and change to RADIO and nothing else, the MANUAL connections now work.

Any ideas? Am I doing something wrong?

Thanks for any help.

GatorAce
Last edited by Gatorace on 2009-09-24 00:24, edited 1 time in total.
Gatorace
 
Posts: 1
Joined: 2009-09-23 23:18

Re: SCPrompt 2009 (Vista Capable - server 1.0.6.4) 21/7/09

Postby JDaus » 2009-09-24 02:48

B wrote:No matter what I tried I kept getting password prompts; there's an encrypted pwd field in your distributed UltraVNC.INI file but I didn't know what it was; more so, I couldn't seem to disable the authentication prompts no matter what I did in the INI file. Things got better once I isolated the bare bones VNCViewer executable outside the bounds of my installed UltraVNC directory. (I'm guessing the registry was being queried despite the UltraVNC.ini setting.)

I don't know why you need the password, as the point of this app is to make the server connect to the viewer ... therefore making passwords unnecessary ... but you can simply replace the password hash in the scprompt/ultravnc.ini with the one from your own ultravnc.ini (from c:\program files\ultravnc\) as i have not yet found a way of setting this password using autoit ...

B wrote:I finally got the MSRC4Plugin to work once I realized I couldn't use the UVNC.EXE in your distribution. Rather, I had to copy WINVNC.EXE from a full installation of UltraVNC into your SCPrompt subdirectory, renaming it to UVNC.EXE. I also had to use the renamed "No Reg" version of MSRC4Plugin.

Sorry ... the testing version uses the latest SC version made by rudi ... and doesn't support MSRC4Plugin at this stage ... as that would require fairly major additional programming ... but if you need encryption, you can use the old (current stable) uvnc.exe or just do as you said ... i may just give a INI option to set the encryption, and it will then work regardless of uvnc.exe being used ... but will have to try this one later ...
[/quote]

B wrote:Anyway, I know your time is limited. I just have some other questions, notes, and observations for your information (and hopefully to improve the project):

All comments are appreciated ... as i don't have time to test this to the point i would like ... so if your having troubles, i want to know where it is so i can fix it so others don't get stuck at the same point ... knowledge shared and all that :D

B wrote:1. It seems the official UltraVNC SCHook.dll is closed source. You provide a different SCHook copyrighted "MaxiVista". Is that open source?

The version i provide in the testing release is that provided in the above mentioned SC version ... it is necesary for that app to work properly ... if you change the uvnc.exe app, you should change the dll's associated with it ... (latest SC needs two Dll's while latest UVNC server only needs the one ... as you stated below).

B wrote:2. The program appears to work properly with just VNCHooks present. According to another thread, UltraVNC looks for the presence of both VNCHooks and SCHook and then uses only SCHook if found. Is this accurate? Am I safe in just eliminating SCHook? (And is there any loss / downside in doing so?)
See the above comment ... the two are necesary for the SC uvnc, but as you are using the server version ... only one is needed

B wrote:3. Is there some way to disable the blinking of the SCPrompt/AutoIT system tray icon? (I know you can disable the separate VNC icon.) I'm thinking of using this as an "always-on" poller, very similar to an installation of LogMeIn or GoToMyPC. The continued blinking can be distracting.
I have added this as a feature of the latest code ... will release when i get time ...

B wrote:4. On a related note, is that repolling interval (as SCprompt looks to reconnect to a viewer/relay) adjustable somewhere?
I have added this as a feature of the latest code ... will release when i get time ...

B wrote:5. The START.BAT in your current distribution uses the "/custom" path that you have since replaced with "/scprompt".
Thanks ... will update the batch file ...

B wrote:6. There may be some logic problem in the EXE builder -- I noticed that I kept running an older iteration of my build during the last step -- my newer builds were ending up in Temp but NOT replacing the older EXE version in the root directory of SCPrompt. So I just began deleting older versions in TEMP and in the root directory prior to each build. (In fact, at some point I started using the build_with_7zip method instead.)
Hmm ... this is interesting ... what OS are you using ??? and what language (windows language settings) ... its possibly a permissions thing ... if you use vista, try running with admin rights (or run as admin or whatever it is ... don't use vista often sorry)

B wrote:7. I'm not clear on whether Rudi's "New SC" you linked to in your earlier announcement is closed or open source; do you happen to know?
It is based on VNC ... so therefore it MUST be open source ... according the licensing of the original VNC ... all related VNC applications must be released under the same license unless it is a complete re-write using 100% new code ... so it is open source, and anyway, 99% of what rudi codes is open source (much respect for that :P )

B wrote:8. Did you rule out embedding the video driver?
the video driver can only be used after the first reboot of a PC ... so therefore it is rather useless in SC situation ... but i may add it as a tray menu option in the future ... if time ...

B wrote:9. Regarding your SCPrompt download page, could you please provide source corresponding to the latest distribution? (Currently I see AutoIT source for an older revision and no source for the UltraVNC components.)
I don't actually modify any source for UVNC code ... i DO use reshacker to remove some of the resources that are not needed (tray menu's and java viewer and MASSIVE icons are about it) ... hope this helps.

B wrote:Wish List Item for Future Consideration: Integration with the open source "Gitso" project for multiplatform support (UltraVNC's traditional Achilles' heel from what I can see). They have an interesting approach,
similar to your own VNC2Me project but without encryption.

I will take a look at it when i have time, and see what i can do ... but the language this is writen in (autoit) is a windows only scripting language ... so it would require a complete re-write in a new language (an actuall programming language - i've not got the time to learn at this point, perhaps in the future ..... who knows :D )

B wrote:(And by the way, are you still actively developing VNC2Me? How would you compare it / position it against SCPrompt?)
Haven't tried the "Gitso" app, so cannot tell you ... VNC2Me SC has not had any work done on it for some time now, but i will be looking at picking it up in the next few days, as someone has offered a UK based server for use as a hosted service ... so i will see if i can get some of the features i was last working on (before i got busy) running, and compile an app for use on his server ... stay tuned (no timeline as yet sorry ... have a few days up my sleave - sort of - so i will see what i can do)

B wrote:Thanks again for your hard work on this, and I hope you take my comments and questions in the helpful and constructive light that I intend. If you can respond to some or all of my points that would great, but if not I understand. I'm looking forward to your response and to the next version!

Sorry it took me so long to respond ... i am not the only person working on this app ... there are 3 of use that contribute (them more than me of late :P ) ... i just maintain and steer it ... glad to see its useful ... i have learnt a LOT by doing this and other small projects ... so it has been good for me too :)

enjoy
ask a silly question and remain a fool for 5 minutes...
don't ask, and remain a fool for life - JDaus 2003

without imperfections, neither you nor i would exist - Steven Hawkins
__
JD
VNC2Me - OpenSource Free Remote Screen\Desktop Sharing Solutions
SecureTech
JDaus
Friend of UVNC
Friend of UVNC
 
Posts: 516
Joined: 2007-03-17 11:00
Location: Sydney, Australia

Re: SCPrompt 2009 (Vista Capable - server 1.0.6.4) 21/7/09

Postby JDaus » 2009-09-24 03:15

Blue_Bird wrote:I know this is a stupid question but can someone please help me.

Don't be afraid to ask 'stupid' questions ... i ask MANY of them often ... its how you get to know something that you didn't know before ...

Blue_Bird wrote:I want to change the user names from black to white (I am using Radio)... I want to leave MANUAL as black.
You cannot change the colour of connection names but leave the manual as it is ... the manual connection is the same as the other connections ... text colour can be changed in the [colour] section of the INI, by altering the "COLORTEXT2" entry ... at least it "should" work ... :D

Gatorace wrote:I have RYO 0.9.6.16... However, using the COMBO GUI I cannot get the Manual to connect to any remote computer----> However if I go into the scprompt.ini and change to RADIO and nothing else, the MANUAL connections now work.

From memory, this was an error that i fixed in the latest testing release (0.9.8.29) ... it now has more downloads than 0.9.6.16 and fewer errors reported ... so it can be considered stable (at least for what you want to do ...)

I have just checked both versions, and yes, the problem occurs in the release you have, but is fixed in the later ...

also, if you upgrading, you will need to compaire the INI's, as the settings changed majorly between the two versions ... some settings where removed, many where moved to new section [GUI] ... all connection settings remained the same ... so it may be easier to just use the settings manager on the latest version, then copy your connection settings across to the new one ...
ask a silly question and remain a fool for 5 minutes...
don't ask, and remain a fool for life - JDaus 2003

without imperfections, neither you nor i would exist - Steven Hawkins
__
JD
VNC2Me - OpenSource Free Remote Screen\Desktop Sharing Solutions
SecureTech
JDaus
Friend of UVNC
Friend of UVNC
 
Posts: 516
Joined: 2007-03-17 11:00
Location: Sydney, Australia

Re: Russian translation (UTF-8 encoding)

Postby JDaus » 2009-09-24 03:47

s-s-s wrote:Hello everybody!
It's post with Russian translation (UTF-8 encoding)
Thank you.

It is Russian translation in the v2m_lang.ini file , which one I used

Code: Select all
###################################################################################################################
[Lang_Russian]
GUI_MNU_FILE = "Файл"
GUI_MNU_EXIT = "Выход"
GUI_MNU_HELP = "Справка"
GUI_MNU_ABOUT = "О программе"
GUI_MNU_SWAP = "Показать главное окно "
MAIN_TAB_SC = "Открыть доступ ко мне"
MAIN_TAB_VIEW = "Посмотреть компьютеры"
MAIN_TAB_SVR = "Начать сотрудничество"
MAIN_TAB_UVNC = "Uvnc SC "
MAIN_DBGBOX =  "Отладка"
MAIN_DBGBOX_TIP =  "Сигнал для показа окна отладки"
MAIN_STATUS_TIP = "Показывать состояние программы"
MAIN_BTN_EXIT =     "Выход"
MAIN_BTN_EXIT_TIP =  "Закрыть приложение"
MAIN_SC_SSN =  "Код сессии"
MAIN_SC_SSN_TIP =  "Введите код сессии для предоставления доступа к Вашему компьютеру"
MAIN_SC_BTN_START =  "Открыть доступ к компьютеру"
MAIN_SC_BTN_STOP =  "Прекратить совместное использование"
MAIN_SVR_SSN =     "Код сессии"
MAIN_SVR_SSN_TIP =  "Введите код сессии для предоставления доступа к Вашему компьютеру"
MAIN_SVR_RND =     " Код сессии "
MAIN_SVR_RND_TIP =  "Сигнал для создания случайного кода сессии"
MAIN_SVR_BTN_START =  "Запустить кооператив"
MAIN_SVR_BTN_STOP =  "Остановить кооператив"
MAIN_VWR_SSN =  "Код сессии"
MAIN_VWR_SSN_TIP =  "Введите код сессии для просмотра"
MAIN_VWR_RND =  "Случайный"
MAIN_VWR_RND_TIP =  "Сигнал для создания случайного код сессии"
MAIN_VWR_BTN_START =  "Вид компьютера(-ов)"
MAIN_VWR_BTN_STOP =  "Остановить просмотр"
MAIN_VWR_RADIO_SC =  "Вид SC"
MAIN_VWR_RADIO_SVR =  "Вид SVR "
MAIN_UVNC_ADD =  "Адрес"
MAIN_UVNC_ADD_TIP =  "Адрес прямого соединения с UVNC-средством просмотра"
MAIN_UVNC_PORT =  "Порт"
MAIN_UVNC_PORT_TIP =  "Порт прямого соединения с UVNC-средством просмотра/повторителя"
MAIN_UVNC_BTN_START =  "Открыть доступ"
MAIN_UVNC_BTN_STOP =  "Прекратить доступ"
# added
MAIN_UVNC_ID_TIP = "ID для соединения с UVNC-повторителем"

MINI_BTN_EXIT =  "Закрыть удаленную сессию"
MINI_BTN_EXIT_TIP = "Закрыть приложение"
MINI_STATUS_TIP =  "Статус и События"
MINI_SESSION_TIP =  "VNC2ME-код сессии"

DEBUG_BTN_START =  "Только SSH"
DEBUG_BTN_STOP =  "Остановить SSH "
DEBUG_BTN_COPY =  "Отладку в буфер"

TRAY_MNU_EXIT =  "Выход"
TRAY_MNU_ABOUT = "О программе"
TRAY_MNU_SHOW =  "О программе"
TRAY_MNU_SHOW_MAIN =  "Главное"
TRAY_MNU_SHOW_MINI =  "Мини"
TRAY_MNU_SHOW_TIMER = "Таймер"
TRAY_MNU_SHOW_DEBUG =  "Отладка"
TRAY_MNU_SHOW_NONE = "Ничего"

TRAYTIP_APP_START_TITLE =  "VNC2Me Prompt 2009"
TRAYTIP_APP_START_LINE1 =Начало работы
TRAYTIP_APP_START_LINE2 =  "Не найдены ключи командной строки"
TRAYTIP_SSH_START_TITLE =  "VNC2Me"
TRAYTIP_SSH_START_LINE1 =  "Запуск SSH-туннеля"
TRAYTIP_SSH_START_LINE2 =  "Посылаю подробности защиты на сервер"
TRAYTIP_SSH_CONNECTED_TITLE =     "VNC2Me"
TRAYTIP_SSH_CONNECTED_LINE1 =  "Безопасное соединение установлено"
TRAYTIP_SSH_CONNECTED_LINE2 = "Запускается VNC по SSH-туннелю "
TRAYTIP_APP_GUISWITCH_TITLE =  " VNC2ME - дополнительно... "
TRAYTIP_APP_GUISWITCH_LINE1 =  " Посмотреть дополнительные параметры для VNC2ME "
TRAYTIP_APP_GUISWITCH_LINE2 =  " Щелчок по правой кнопки мыши на этот значок "
TRAYTIP_APP_EXITING_TITLE = "Завершение работы"
TRAYTIP_APP_EXITING_LINE1 =  "Остановка запущенных процессов"
TRAYTIP_APP_EXITING_LINE2 =  "Удаление всех временных изменений"
TRAYTIP_DEBUG_COPIED_TITLE =     "VNC2Me"
TRAYTIP_DEBUG_COPIED_LINE1 = "Debug OutPut Copied"
TRAYTIP_DEBUG_COPIED_LINE2 = "Открыть блокнот и ' Редактирование > Вставка ' "
TRAYTIP_VWR_STARTSC_TITLE =        "VNC2Me"
TRAYTIP_VWR_STARTSC_LINE1 =  "Средство просмотра запущено"
TRAYTIP_VWR_STARTSC_LINE2 =  "Ожидание соединений"
TRAYTIP_VWR_STARTSVR_TITLE =     "VNC2Me"
TRAYTIP_VWR_STARTSVR_LINE1 = "Средство просмотра запущено"
TRAYTIP_VWR_STARTSVR_LINE2 = "Соединение с сервером"
#added
TRAYTIP_SC_START_TITLE = "VNC2Me Prompt 2009"
TRAYTIP_SC_START_LINE1 =  "VNC-подключение началось"
TRAYTIP_SC_START_LINE2 =  "Пытаюсь соединиться для предоставления доступа"

MSG_HOST_TITLE = "Компьютер не кэширован"
MSG_HOST_TEXT =  "Этот компьютер не известен! Хотите добавить его к известным компьютерам? "
MSG_SSN_TITLE =  "Ошибка"
MSG_SSN_TEXT =  "Введите код сессии и попытайтесь снова"
MSG_VWR_TITLE =  "Средство просмотра"
MSG_VWR_TEXT =  "Не выбран тип подключения средства просмотра! Использовать SC?"
MSG_TIMER_TITLE =  "Таймер подключения"
MSG_TIMER_TEXT =  "Сессия соединена с : "
MSG_PORTC_TITLE =  "Ошибка - отказ сессии"
MSG_PORTC_TEXT =  "Отказ SSH-туннеля сессии! Повторить тот же ID-сессии ? "
MSG_SSHSVR_TITLE =  "Создать SSH-сервер"
MSG_SSHSVR_TEXT =  "Подключать к SSH серверу? "
MSG_SSHUSER_TITLE =  "Имя пользователя"
MSG_SSHUSER_TEXT =  "Введите SSH-имя пользователя"
MSG_SSHPASS_TITLE =  "Пароль"
MSG_SSHPASS_TEXT =  "Введите SSH-пароль"
MAIN_UVNC_DROPDEFAULT =  "Ввести в ручную"
###################################################################################################################

encoding UTF-8

Thanks, have changed file format to UTF-8 (didn't think of this ...)

s-s-s wrote:And by the way
When I attempt to download the distribution kit, my antivirus program (Kasperskiy) issues warning:

Code: Select all
21.09.2009 20:09:11   HTTP-object <http://vnc2me.org/en/downloads.html?func=download&id=6&chk=XXXXXXXXXXX&no_html=1/build_resources/7z_v2m.sfx>:
virus detected - Trojan.Win32.Buzus.bpcg.
Interesting ... it detected the sfx as a virus, but left the autoit application alone ... hmmm ... i have not seen this before ... i am fairly certain that the sfx DOES NOT contain a virus ... but as i have not written the code in that file, i cannot be 100% sure it isn't a virus ... if in doubt, trust your antivirus ...

s-s-s wrote:Thank for your program
Thanks for the translation ... what "LANG_IDENT" string do you use (what OSlang idents are used by russian) ... i have "0419" as the only one ... is this accurate ???
Last edited by JDaus on 2009-09-24 03:52, edited 1 time in total.
ask a silly question and remain a fool for 5 minutes...
don't ask, and remain a fool for life - JDaus 2003

without imperfections, neither you nor i would exist - Steven Hawkins
__
JD
VNC2Me - OpenSource Free Remote Screen\Desktop Sharing Solutions
SecureTech
JDaus
Friend of UVNC
Friend of UVNC
 
Posts: 516
Joined: 2007-03-17 11:00
Location: Sydney, Australia

Re: SCPrompt 2009 (Vista Capable - server 1.0.6.4) 21/7/09

Postby JDaus » 2009-09-24 13:32

New Alpha Release Available ... Downloads removed due to potential virus

********** History **********
0.9.9.30
    Source is now included in all Alpha releases as a resource (open reshacker, and take a look around) - will try to remember to remove for betas ...
    Added TraySetStateShow ([GUI] Section) 'readonly' INI setting that allows flexability icon displaying (showing, flashing or even hiding) - these should be set to the appropriate number for the AutoIT 'TraySetState()' function
    Added TraySetStateFlash ([GUI] Section) 'readonly' INI setting that allows flexability icon displaying (showing, flashing or even hiding) - these should be set to the appropriate number for the AutoIT 'TraySetState()' function
    Added AppReRunTimer ([Common] Section) 'readonly' INI setting that allows flexability in re-runnning the vnc server after it closes. (default 30 seconds)
    App now waits 30 seconds (default - see above timer setting) before starting the icon tray flashing ... (bi-product of above coding ... but i like it)
    Added autoreconnect ([Common] Section) 'readonly' INI setting that allows users to disable the automatic reconnection feature if required
    Added Encryption support if fileexists(MSRC4Plugin.dsm) in the same directory and UseSC_Server = 0 (untested)
    Added Translations & fixed the v2m_lang.ini file format


builder now creates a new file based on $date_$time ... this should get around most builder problems i think ...

If i haven't added or fixed something, please let me know in a 'Quick' reply, and i will fix it ASAP.
Last edited by JDaus on 2009-09-26 01:49, edited 1 time in total.
ask a silly question and remain a fool for 5 minutes...
don't ask, and remain a fool for life - JDaus 2003

without imperfections, neither you nor i would exist - Steven Hawkins
__
JD
VNC2Me - OpenSource Free Remote Screen\Desktop Sharing Solutions
SecureTech
JDaus
Friend of UVNC
Friend of UVNC
 
Posts: 516
Joined: 2007-03-17 11:00
Location: Sydney, Australia

PreviousNext

Return to SC

Who is online

Users browsing this forum: No registered users and 1 guest