Ultra VNC Server Auto Accept Connection.

[flokos]

Hello Im new here but as all here i use ultra vnc , though I have a problem .
I need to setup an ultra vnc server that will ask for password authentication though it will connect automatically after the authentication and will not
ask for the user to accept the connection from the server side .

I mean you got a pc running the server , normally you would connect to it type your credentials and then you should hit accept on the pc the server is running .
What I want is this accept thing to be automatic because I have to access my pc from long distance .
(Not only one pc but many).

Please enlighten me on this matter .

[Rudi De Vos]

from
http://www.uvnc.com/docs/uvnc-server/69 ... ncini.html

Code: Select all

AuthHosts= 
+ =allow 
- = deny 
? = query 
syntax: 
-:+10.0.60.141:?10.0.31.169:-10.0.20.240: 
instead of 10.0.60.141 you can use 10.0.60, then it is valid for the full range of ip addresses..

QuerySetting=2 
Define on how to react on the (-,?,+) from the Authhosts. 
0="+:Accept, ?:Accept, -:Query" 
1="+:Accept, ?:Accept, -:Reject" 
2="+:Accept, ?:Query, -:Reject [Default]" 
3="+:Query, ?:Query, -:Reject" 
4="+:Query, ?:Reject, -:Reject" 
It is used to specify a set of IP address templates which incoming connections must match in order to be accepted. By default, the template is empty and connections from all AuthHosts_Tip5="hosts are accepted. The template is of the form: 
+[ip-address-template] 
?[ip-address-template] 
-[ip-address-template] 
In the above, [ip-address-template] represents the leftmost bytes of the desired stringified IP-address. 
For example, +158.97 would match both 158.97.12.10 and 158.97.14.2. Multiple match terms may be specified, delimited by the ":" character. Terms appearing later in the template take precedence over earlier ones. e.g. -:+158.97: would filter out all incoming connections except those beginning with 158.97. Terms beginning with the "?" character are treated by default as indicating hosts from whom connections must be accepted at the server side via a dialog box. The QuerySetting option determines the precise behaviour of the three AuthHosts options..

QueryTimeout=10 
QueryTimeout is the time the messagebox is shown..

QueryAccept=0   ( 0=refuse 1=accept  2=refuse)
This popup a timed messagebox to allow the user (server site) to allow/reject an incoming connect..

QueryIfNoLogon=0 

The accept popup box is user definable

QueryAccept=1 -> after timeout box is auto accepted