UltraVNC lost connectvity on (CTRL+ALT+DEL)/user switch/

Here you will find help for frequently asked questions as well as for your specific question.

UltraVNC lost connectvity on (CTRL+ALT+DEL)/user switch/

Postby vineeta1shukla » 2017-02-01 05:06

Hello

I use UltraVNC on my computers. Everything is working fine except when i press (CTRL+ALT+DEL) to switch user, it loose the connection.I can't use the computer when I log out or switch user.


Any help would be appreciated :)

Thanks in advance.
vineeta1shukla
8
8
 
Posts: 29
Joined: 2015-06-01 17:32

Re: UltraVNC lost connectvity on (CTRL+ALT+DEL)/user switch/

Postby ddbivens » 2017-02-05 01:12

I know you can get this kind of result if you run the UltraVNC program as an application and it is not installed with Administrator access. Try installing the UltraVNC program on the PC you are trying to remote into then reboot the PC. After that, try the connection again. I also believe that UAC can cause this problem. You might want to lower the UAC setting for testing, but I never would recommend running your PC with less than the default setting.
I might be totally wrong in this, I am only trying to help.
ddbivens
20
20
 
Posts: 62
Joined: 2015-12-26 14:53
Location: Tellico Plains, TN 37385 USA

Re: UltraVNC lost connectvity on (CTRL+ALT+DEL)/user switch/

Postby mosh911 » 2017-03-31 06:14

If I understood the question correctly --

I was able to bypass the problem with the UAC setting that says:
Notify me only when
apps try to make
changes to my
computer (don't dim
my desktop)

This setting is I believe below the default setting.
mosh911
 
Posts: 3
Joined: 2017-03-31 05:58


Return to General help

Who is online

Users browsing this forum: No registered users and 6 guests