Step by Step for Pchelpware release 1.0

[redge]

another doc of PcHelpWare release 1.0 by Bevtech and other users

PcHelpware Step by Step

http://www.bevingtontechnologies.com/ww ... bystep.doc

http://www.bevingtontechnologies.com/ww ... bystep.pdf

[dwkrueger]

Step by step is perfect except when both computers are behind routers. Step by step implies that uvnc.com is a repeating service. Is this true. Can we just use this as a repeater?

If we need our own repeater it is quite ambiguous what ports the repeater service listens to and what get forwarded.

Summary Directconnect when behind routher no sweat works great. But outside network I have yet to get it work.

[mattice06082]

uvnc.com does have a linux version of the PcHelpWare repeater running, but there is currently a bug which makes it unreliable. Other Repeaters besides uvnc.com (3 so Far) lists another public repeater.

In order to get the direct connection working when both machines are behind routers you need to port forward TCP traffic on port 5500 to the machine running the PcHelpWare_viewer and enter your public IP address or DynDNS hostname when the creating the server. In addition, you'll need to allow the traffic in any security software running on the viewer machine.

[empty]

Can you use an alternate port for PcHelpWare instead of 5500? Since I am running UVNC server with repeater here, forwarding 5500 to one machine will probably break UVNC for other machines.

[bevtech]

Direct connection listen port change the port.

If using the public repeater those ports are fixed can not be changed.

If you setup your own repeater you can make those ports what you want to use..

[empty]

Can you set up UVNC Viewer to listen at a different port? Where do you set that?

[bevtech]

The pchelpware is a stand alone application it has its own viewer and server and is not compatible with the vncviewer..

[barcajunior]

not compatible with the vncviewer

It's not good news.

[lpelaez1]

i did step by step including port forward at the router level and the dsl modem and only lan works from outside wan pchelp dont work
teamvierw is better you dont have to configure nothing

[Mikie85]

I agree with you, the step by step procedure is a bit complicated, teamview is much more easier to handle.

teamvierw is better you dont have to configure nothing

[remoter]

Hello.

When will PcHelpware be compatible with Windows 7 for both host and remote sides?

Thanks in advance.

[andrewza]

To be compitable it need to compile on 64bit IDE. And recompile whole code. )
astigmatism
P iCore7 266 16gig/ram

[D9412]

Is the "Unique ID" number a number that you pick out of the air or is generated by the repeater?