pchelpware, fast direct connection dynamic viewer

pchelpware, fast direct connection dynamic viewer

Postby redge » 2006-11-20 22:51

Testing pchelpware release 1.0
(built 2 January 2007 ~01h00 am)
direct connection via dynhost uvnc.com helper and dynamic ip viewer


You don't need to subscribe to dynamic dns service.
uvnc.com is the helper for everyone require almost easy and fast direct connection.
The viewer have an dynamic ip and ready to open single port at their side and not familiar with dynamic DNS service
and you don't want to subscribe or forgotten/closed your account from dynamic dns service provider.

--== viewer require click "Start" before server "Connect" ==--


1. -=viewer (you)=-

you, applicable only to pchelpware_viewer, (do not apply this part to partner)
if your Internet Gateway Device is not fully compatible UPnP or not enabled.
open incoming port TCP 5500 to your Internet Gateway Device, NAT router/firewall and redirect to your internal computer where sit the pchelpware_viewer
see portforward for how to forward/virtual server from your broadband product to your computer.
http://www.portforward.com/routers.htm

[syntax="text"]
Single Port Forwarding

Application | External | Internal | Protocol | IP Address | Enable
---------------------------------------------------------------------------------
pchelpware | 5500 | 5500 | TCP | 192.168.1.100 | yes
---------------------------------------------------------------------------------
[/syntax]


download PchelpWare_viewer.exe


Set the PcHelpWare_viewer.exe as below, then click Start
replace "mytestname" by your own
Image


2. -= partner =-

open and start
PcHelpWare_partner_direct.exe
enter login mytestname and password
Image


3. -=You are connected to partner =- :-)


Quick Trouble shoot

Disable DirectX (optional)
required for some situation of blank or black screen

software/hardware unable to allow Direct3D ..

or /and

missmatch, wrong or forgotten password (local or/and remote)

PcHelpWare not compatible VNC
so you require pchelpware_viewer and pchelpware_server for sucess.


for your information,
the content of helpdesk.txt of the above PcHelpWare_partner_direct.exe
the part to change is mytestname and password by your own aliasname , public ip or FQDN


------------------------- begin helpdesk.txt -----------------------------------
-connect dyn:5500 -dynhost uvnc.com:5912 -dynname ask -passwd ask
------------------------- end helpdesk.txt --------------------------------------

note:
download the full package of pchelpware for create your own pchelpware_server for give to your partner.

How to create pchelpware_server ?
from pchelpware_viewer, complete required field as example above.
click over "Create Server for this viewer settings" or "Create Server"
find the file created to folder
\PcHelpWare\myservers\mytestname\PcHelpWare_server.exe (as exemple)
send your custom file to your partner.

http://www.pchelpware.com/download/index.html
Last edited by redge on 2009-05-31 09:23, edited 33 times in total.
UltraVNC 1.0.9.6.1 (built 20110518)
OS Win: xp home + vista business + 7 home
only experienced user, not developer
redge
Super-Mod
Super-Mod
 
Posts: 6815
Joined: 2004-07-03 17:05
Location: Switzerland - Geneva

Re: pchelpware, fast direct connection dynamic viewer

Postby mitsjol » 2007-04-19 08:44

Failed to set alias, i filled in al de fields how you did it... is that wrong?
mitsjol
 
Posts: 1
Joined: 2007-04-17 12:25

Re: pchelpware, fast direct connection dynamic viewer

Postby YY » 2007-04-19 09:23

There is an issue with the repeater on dynalias function and not yet solved, thus this service is not supported at this moment.
YY
200
200
 
Posts: 996
Joined: 2006-11-13 15:11


Return to PcHelpWare

Who is online

Users browsing this forum: No registered users and 3 guests